Publications:


Journal Papers

Van de Ven, J., 2011, “On Bulk Modulus in Switch-Mode Hydraulic Circuits - Part I: Modeling and Analysis,” Journal of Dynamic Systems, Measurement, and Control, Under Review.

Van de Ven, J., 2011, “On Bulk Modulus in Switch-Mode Hydraulic Circuits - Part II: Experimental Results,” Journal of Dynamic Systems, Measurement, and Control, Under Review.

Van de Ven, J., and Cusack, J., 2011, “Synthesis and Baseline Testing of a Digital Pulse-Width-Modulated Clutch,” Journal of Dynamic Systems, Measurement, and Control, Under Review.

Tu, H., Rannow, M., Wang, M., Li, P., Chase, T., and Van de Ven, J., 2011, “Design, Modeling, and Validation of a High-Speed Rotary PWM On/Off Hydraulic Valve,” Journal of Dynamic Systems, Measurement, and Control, Under Review.

Van de Ven, J. D., and Demetriou, M. A., 2011, "Switch-Mode Continuously Variable Transmission: Modeling and Optimization," Journal of Dynamic Systems, Measurement, and Control, Accepted.

Van de Ven, J. D., and Katz, A., 2011, "Phase-Shift High-Speed Valve for Switch-Mode Control," Journal of Dynamic Systems, Measurement, and Control, v. 133, n. 1

Van de Ven, J. D., 2009, "Increasing Hydraulic Energy Storage Capacity: Flywheel-Accumulator," International Journal of Fluid Power, v. 10, n. 3, p. 41-50.

Van de Ven, J. D., 2009, "Mobile Hydraulic Power Supply: Liquid Piston Stirling Engine Pump," Renewable Energy, v. 34, n. 11, p. 2317-2322.

Van de Ven, J. D., and Li, P. Y., 2009, "Liquid Piston Gas Compression," Applied Energy, v. 86, n. 10, p. 2183-2191.

Van de Ven, J., and Erdman, A., 2007, "Bridging Gaps in Laser Transmission Welding of Thermoplastics," Journal of Manufacturing Science and Engineering, v. 129, n. 6, p. 1011-1018.

Van de Ven, J., and Erdman, A., 2007, "Laser Transmission Welding of Thermoplastics: Part II: Experimental Model Validation," Journal of Manufacturing Science and Engineering, v. 129, n. 5, p. 849-858.

Van de Ven, J., and Erdman, A., 2007, "Laser Transmission Welding of Thermoplastics: Part I: Temperature and Pressure Modeling," Journal of Manufacturing Science and Engineering, v. 129, n. 5, p. 859-867.

Van de Ven, J., and Erdman, A., 2007, "Hot Pin Welding of Thin Polyvinyl Chloride Sheet," Journal of Vinyl and Additive Technology, v. 13, n. 2, p. 110-115.

Van de Ven, J., and Erdman, A., 2006, "Near-Infrared Laser Absorption of Polyvinylchloride at Elevated Temperatures," Journal of Vinyl and Additive Technology, v. 12, n. 4, p. 166-173.

Van de Ven, J., and Erdman, A., 2006, "Simultaneous Measurement of Laser Reflection and Transmission of Polyvinylchloride," Optical Engineering, v. 45, n. 9.

Conference Papers (Technical)

Wilhelm, S., and Van de Ven, J., 2011, “Synthesis of a Variable Displacement Linkage for a Hydraulic Transformer,” ASME International Design Engineering Technical Conference, Washington, D.C., August 28-31, 2011.

Van de Ven, J., and McInnis, J., 2011, “Design and Experimental Results of a Bench Top Flywheel-Accumulator for Compact Energy Storage,” National Conference on Fluid Power, International Fluid Power Exposition, Las Vegas, NV, March 23-25, 2011.

Li, P., Loth, E., Simon, T., Van de Ven, J., and Crane, E., 2011, “Compressed Air Energy Storage for Offshore Wind Turbines,” National Conference on Fluid Power, International Fluid Power Exposition, Las Vegas, NV, March 23-25, 2011.

Wu, J., and Van de Ven, J., 2010, “Development of a High-Speed On-Off Valve for Switch-Mode Control of Hydraulic Circuits with Four-Quadrant Control,” ASME International Mechanical Engineering Congress and Exposition, Vancouver, British Columbia, Canada, November 12-18, 2010.

Jorgenson, R., and Van de Ven, J., 2010, “Computational Development of a Gas to Liquid Heat Exchanger with a Breathing Operation,” ASME International Mechanical Engineering Congress and Exposition, Vancouver, British Columbia, Canada, November 12-18, 2010.

Lynch, B., Jannetti, Lados, D., and Van de Ven, J., 2010, “An Integrated Mechanical-Metallurgical Approach to the Design, Testing, and Analysis of Welded Bicycle Forks,” Poster Presentation, ASME International Mechanical Engineering Congress and Exposition, Vancouver, British Columbia, Canada, November 12-18, 2010.

Katz, A., and Van de Ven, J. D., 2009, "Design of a High-Speed On-Off Valve," ASME International Mechanical Engineering Congress and Exposition, Lake Buena Vista, FL, November 13-19, 2009.

Cole, G., and Van de Ven, J. D., 2009, "Design of a Variable Radius Piston Profile Generating Algorithm," ASME International Mechanical Engineering Congress and Exposition, Lake Buena Vista, FL, November 13-19, 2009.

Piya, C., Sircar, I., Van de Ven, J. D., and Olinger, D., 2009, "Numerical Modeling of Liquid Piston Gas Compression," ASME International Mechanical Engineering Congress and Exposition, Lake Buena Vista, FL, November 13-19, 2009.

Van de Ven, J. D., 2009, "Fluidic Variable Inertia Flywheel," International Energy Conversion Engineering Conference, Denver, CO, August 2-5, 2009.

Araujo, J. J., DeMalia, M. A., Lambusta, C. M., Morocco, A. J., Van de Ven, J. D., 2009, "Switch-Mode Continuously Variable Transmission Prototype Design and Testing," International Energy Conversion Engineering Conference, Denver, CO, August 2-5, 2009.

Forbes, T., and Van de Ven, J., 2008, "Switch-Mode Continuously Variable Transmission with Flywheel Energy Storage," ASME International Mechanical Engineering Congress and Exposition, Boston, MA.

Van de Ven, J., Gaffuri, P., Mies, B., and Cole, G., 2008, "Developments Towards a Liquid Piston Stirling Engine," International Energy Conversion Engineering Conference, Cleveland, Ohio.

Van de Ven, J., Olson, M., and Li, P., 2008, "Development of a Hydro-Mechanical Hydraulic Hybrid Drive Train with Independent Wheel Torque Control for an Urban Passenger Vehicle," Proceedings of the International Fluid Power Exposition, Las Vegas, Nevada, March 11-15, 2008.

Li, P., Van de Ven, J., and Sancken, C., 2007, "Open Accumulator Concept for Compact Fluid Power Energy Storage," Proceedings of the ASME International Mechanical Engineering Congress and Expo, Seattle, Washington, November 11-15, 2007.

Tu, H., Rannow, M., Van de Ven, J., Wang, M., Li, P., and Chase, T., 2007, "High Speed Rotary Pulse Width Modulated On/Off Valve," Proceedings of the ASME International Mechanical Engineering Congress and RD&D Expo, Seattle, Washington, November 11-15, 2007.

Van de Ven, J., and Stackley, M., 2004, "Lowering Upender Design and Synthesis," Proceedings of the ASME Design Engineering Technical Conference and Computers and Information in Engineering Conference 2004: 28th Biennial Mechanisms and Robotics Conference, Salt Lake City, Utah, v. 2a, p. 709-716.

Conference Papers (Teaching)

Beach, R., Gennert, M., Michalson, W., Van de Ven, J., Padir, T., Tryggvason, G., Fischer, G., 2010, “Robotics Innovation Competition and Conference (RICC): Building Community Between Academia and Industry Through a University-Level Student Competition," ASEE Annual Conference & Exposition, Louisville, Kentucky, June 20-23, 2010.

Ciaraldi, M., Cobb, E. C., Cyganski, D., Fischer, G., Gennert, M., Demetriou, M., Looft, F., Michalson, W. R., Miller, B., Padir, T., Rong, Y., Stafford, K., Tryggvason, G., and Van de Ven, J. D., 2009, "Robotics Engineering: A New Discipline for a New Century," ASEE Annual Conference & Exposition, Austin, TX, June 14-17, 2009.

DiBlasi, M., Doyle, J.K., Gennert, M., Michalson, W.R., Miller, B., Morgan, J., Morrison, E., Praetorius, D, Randall, C.,Shaver, C., Tryggvason, G., and Van de Ven, J.D., 2009, "Social Networking in the FIRST Robotics Competition Community," ASEE St. Lawrence Section Conference, Bridgeport, CT, April 3-4, 2009.