Checklist
| Team # | Inspector: | PASS | |||
| Weight | Heaviest configuration with battery, control unit, decorations(<= 8 lbs.) | Date | |||
| Size | Must fit freely in ready-to-run condition (15" x 18" x 24") | Time | |||
Mechanical
| Team name and/or logo and number is clearly marked and viewable from 20 feet away. | |
| Decorations must be non-functional (cannot affect outcome of match). | |
| No sharp objects that could harm people or damage playing field. | |
| No tape used as a fastener. Only acceptable as an electrical insulator or decoration. | |
| No loose wires or material to cause entanglement. | |
| Battery is secured and easily removable. |
Electrical
| Only 1 battery on robot. | |
| The Robot Controller LED’s are visible. | |
| No wires in electrical contact with robot metal chassis. | |
| Proper use of electrical connectors and electrical tape. | |
| Team # set correctly on Robot Controller (power up RC via tether connection to check). |
Construction
| Fasteners are not used for anything beyond fastening. | |
| Lexan sheet may not be greater than ¼" in thickness. | |
| Aluminum sheet may not be greater than 1/8" in thickness. | |
| Any metal or plastic round shaft or tubing no greater than ½" diameter. | |
| No plywood or wood greater than 1/4" thickness. | |
| Any springs/elastic bands must be designed to release energy no faster than it was input. |
Last modified: Nov 02, 2004, 09:04 EST